Procom RD-C Manual do Utilizador descarregar pdf (Página 4)

Page 4 of 12

CONFIGURATION:___________________________

There are three aspects of the ProComm that require configuration.

• Radio Channel

• Relays Normally Open or Normally Closed

• Programming

Radio Channel Configuration

The ProComm supports eight channels to avoid interaction when multiple

ProComm systems are employed in close proximity situations. The radio

channel can be configured at the factory prior to shipment or by a technician

in the field. See the configuration sheet to specify a channel for factory

configuration.

Channel Frequency

0 903.37 MHz

1* 906.37 MHz*

2 907.87 MHz

3 909.37 MHz

4 912.37 MHz

5 915.37 MHz

6 919.87 MHz

7 921.37 MHz

*Factory default channel selection

For safety reasons, on site radio channel configuration requires

the following basic steps.

1. Power down and lock out any systems that could be

operating at the frequencies shown above.

2. Set the TriggerPad channel. (See instructions below.)

3. Set the channel of the ProComm. (Refer to the appropriate

receiver user manual, i.e. ProComm 100, for receiver

configuration.)

4. Return processes and equipment to service.

Please note, to avoid accidentally duplicating channels, it is

recommended that the default channel NOT be used in a multi-

station application.

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Procom RD-C Manual do Utilizador Página 4